How to clean your Dirt Bike, Road Bike, or ATV like a pro!
When it comes to cleaning your bike or ATV, a garden hose doesn’t cut it - but hitting it with a hardcore pressure washer can do more harm than good. That’s where the BLAHST R18 and Air Maxx Blower Dryer come in. Safe, smart, and dialled-in for the job.
Bike washing just got EASY!!!
John Prutti, Free-Rider & Bike Builder test drives the BLAHST R30 Pressure Washer.
Bike washing just got EASY!!!
John Prutti, Free-Rider & Bike Builder test drives the BLAHST R30 Pressure Washer.
Choose the right tools for the job
R30 Wall-Mounted Pressure Washer
Lightweight Hose
2300 PSI Working Pressure
Quick release attachment
Regulator To Adjust Foam
Hose Length
Wall-Mounted
R18 Wall-Mounted Pressure Washer
Lightweight Hose
1650 PSI Working Pressure
Ceramic Hydrophobic Coating Spray
Microfibre Wash Towels (2 pack)
Step-by-Step Cleaning Guide
Things to Avoid
- Don’t use max PSI directly on electronics, air intakes, or chain.
- Don’t let foam dry on the surface.
- Don’t towel dry unless it’s spotless (risk of scratching).
- Don’t use max PSI directly on electronics, air intakes, or chain.
- Don’t let foam dry on the surface.
- Don’t towel dry unless it’s spotless (risk of scratching).
Pre-Rinse with the R18
Use the R18 to blast off loose dirt, dust, and mud. The retractable hose gives you full reach without the mess.
Pro Tip: Stay about 50cm back and avoid direct spray into bearings, electronics, or seals.
Foam it Up
Attach your BLAHST Foam Cannon and apply a layer of BLAHST Foam Wash. Let it dwell for a couple of minutes to break down grime - but don’t let it dry.
Agitate (Gently)
Use a soft brush or microfibre wash towels to clean high-contact areas—handlebars, wheels, chain guard, fairings. Be gentle around decals and painted areas.
Rinse Down
Use the R18 again to rinse off all soap and residue. Controlled pressure means no damage to seals, bearings, or wiring.
Drying with the Air Maxx
Forget towels. Hit your ride with the Air Maxx Blower Dryer for a streak-free, contactless dry. It blows warm filtered air to get into all the nooks—under seats, radiators, crevices, spokes and suspension.
Bonus: Great for drying gear and helmets too.
Pro Detailer Tip
Follow up with a ceramic spray like BLAHST’s Ceramic Hydrophobic Coating Spray to keep future mud and gunk from sticking. Keeps your bike looking mint for longer, and easier to clean next time.
Keeping your gear clean
How to clean a dirt bike or ATV after a muddy ride
Mud comes off a dirt bike or ATV while it is still soft, so rinse it the afternoon you get home.